NPort 5150 (w/o adapter)
1 port device server without adaptor, 10/100M Ethernet, RS-232/422/485 DB9 male, 15KV ESD V or 230V
NPort 5210-P
2 port Programable Communication gateway, 10/100M Ethernet,
RS-232 RJ-45 x 2, 12-30V
NPort 5232
2 port RS-422/485 device server, 10/100M Ethernet, terminal block, 12-30VDC
NPort 5232I
2 port RS-422/485 device server, 10/100M Ethernet, terminal block, 12-30VDC with 2KV isolation
NPort 5232I-T
2 port RS-422/485 device server, 10/100M Ethernet, terminal block, 12-30VDC with 2KV isolation, -40~75°C
NPort 5410
Moxa Nport 5410 - NPort 5400 Series - 4 port device server, 10/100M Ethernet, RS-232, DB9 male, 12-48 VDC, without Adapter
The Moxa NPort 5410 is a device server that provides many useful features for serial-to-Ethernet applications, including an independent operation mode for each serial port, user-friendly LCD panel for easy installation, dual DC power inputs, and adjustable termination and pull high/low resistors.
Network Readiness for up to 4 Serial Devices
NPort 5400 device servers can conveniently and transparently connect up to four serial devices to an Ethernet network, allowing you to network your existing serial devices with only basic configuration. Data transmission between the serial and Ethernet interfaces is bidirectional. By using NPort device servers, you not only protect your current hardware investment, but also allow for future network expansion. You can both centralize the management of your serial devices and distribute management hosts over the network.
Independent Operation Mode for Each Serial Port
NPort 5400 device servers can be used to connect different devices for remote data polling or event handling over a TCP/IP network. Each serial port on the NPort 5400 operates independently to provide maximum versatility. For example, port 1 can operate in Driver mode, port 2 in TCP Server mode, and ports 3 and 4 in TCP Client mode.
User-Friendly LCD Panel for Easy Installation
An LCD panel is built into the NPort 5400’s top panel, with four buttons for data input, configuration, and operation mode selection. The LCD panel displays the server name, serial number, and IP address, and it can be used to enter or modify parameters such as IP address, netmask, and gateway. (The LCD panel is not available on wide-temperature models.)
Dual DC Power Inputs
NPort 5400 device servers support dual power sources by providing both a DC terminal block input and a DC power jack input. Providing two types of power inputs gives users greater flexibility for use with different applications.
Adjustable Termination and Pull High/Low Resistors
The NPort 5400 Series provides adjustable termination and pull high/low resistors for RS-485 applications. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals, and the pull high/low resistors may need adjusting to maintain the integrity of the electrical signal. Since no set of resistor values is universally compatible with all environments, the NPort 5400 has four sets of DIP switches on the bottom panel to set the termination and pull high/low resistor values.
NPort 5610-8-DTL-T
8-port RS-232 desktop device server with DB9 male connectors, -40 to 75°C operating temperature
NPort 5630-16
16 port device server, 10/100M Ethernet, RS-422/485, RJ-45 8pin, 100V or 240V
NPort 5630-8
8-port RS-422/485 rackmount device server with RJ45 connectors and 100-240 VAC power input
NPort 5650-16
16 port device server, 10/100M Ethernet, RS-232/422/485, RJ-45 8pin, 100V or 240V
NPort 5650-16-HV-T (Wide Temp)
16-port RS-232/422/485 to rackmount device server with RJ45 connectors and 88 to 300 VDC power input, -40 to 85°C operating temperature
NPort 5650-16-M-SC
16 port device server, 10/100M Ethernet, RS-232/422/485, RJ-45 8pin, 100M Multi mode Fiber, SC connector, 100V or 240V
NPort 5650-16-S-SC
16 port device server, 10/100M Ethernet, RS-232/422/485, RJ-45 8pin, 100M Single mode Fiber, SC connector, 100V or 240V
NPort 5650-8
8 port device server, 10/100M Ethernet, RS-232/422/485, RJ-45 8pin, 100V or 240V
NPort 5650-8-DT
8-port desktop device server, 2 10/100M Ethernet, RS-232/422/485 B9, 12 - 48VDC
NPort 5650-8-DT-J
8-port RS-232 desktop device server with RJ45 connectors and 48 VDC power input
NPort 5650-8-DTL
8-port RS-232/422/485 desktop device server with DB9 male connectors, 0 to 60°C operating
NPort 5650-8-HV-T (Wide Temp)
8-port RS-232/422/485 to rackmount device server with RJ45 connectors and 88 to 300 VDC power input, -40 to 85°C operating temperature
NPort 5650-8-M-SC
8 port device server, 10/100M Ethernet, RS-232/422/485, RJ-45 8pin, 100M Multi mode Fiber, SC connector, 100V or 240V
NPort 5650-8-S-SC
8 port device server, 10/100M Ethernet, RS-232/422/485, RJ-45 8pin, 100M Single mode Fiber, SC connector, 100V or 240V
NPort 5650I-8-DT
8-port desktop lite device server, 2 10/100M Ethernet, RS-232/422/485 DB9 Isolation, 12-48VDC, 0 to 60°C
NPort 5650I-8-DTL
8-port RS-232/422/485 desktop device server with DB9 male connectors and 2 kV isolation, 0 to 60°C operating temperature
|
|
